home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 4
/
QRZ Ham Radio Callsign Database - Volume 4.iso
/
mods
/
pro2026.mod
< prev
next >
Wrap
Internet Message Format
|
1994-11-12
|
2KB
From: steuer@clam.rutgers.edu (robert Steuer)
Newsgroups: alt.radio.scanner
Subject: PRO-2026 MODS!!!
Date: 20 Oct 92 14:55:50 GMT
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 29
Hi all, just got these mods, hot off the FAX!
Note: It is not lawful to monitor cellular or conventional mobile
telephone conversations.
The 2026 has cellular frequencies deleted at the factory, but
restoration is the easiest ever! - clip one marked wire! All you need
is a Philips screwdriver and wire cutters.
1. Turn the scanner upside-down and remove the four side screws
holding the bottom cover in place; pull the cover loose and set it
back about two inches out of the way.
2. Locate the small circuit board at the lower right-hand corner and
find jumper L201. Cut it and slightly separate the break.
3. Reassemble the radio which now has continuous 806-956 MHz coverage
and 30KHz search increments in the cellular band.
*** I have not tried the above mod, but did acquire it from a
commercial radio dealer who is very respectable, so as always, proceed
at your own risk and realize that this will violate your warranty!
Have Fun!
Rob KF2EK
-------------------------------------------------------------------------------
| Robert Steuer Internet: steuer@clam.rutgers.edu |
| Rutgers University Amateur Radio: KF2EK@N3FOA.#EPA.PA.USA.NA |
-------------------------------------------------------------------------------